ROCKBROS Bicycle Helmet Warning Rear Light USB Rechargeable and Waterproof

Bicycle helmet tail light

USB charging

9 modes (click the switch to switch modes in turn, long press to turn off the tail light)

1. Always on (100%) for about 3 hours
   2. Always on (70%) for about 3.2h
   3. Strobe mode, about 9h
   4. Slow flash mode, about 56h
   5. SOS mode, about 9h
   6. The horse race flashes, about 14 hours
   7. Tai Chi flashes, about 17h
   8. Neon flashing, about 5h
   9. Breathing flashes, about 8h

• ABS engineering plastic shell, lightweight, durable and corrosion-resistant.
• Small size and light weigh
• Suitable for a variety of ROCKBROS helmets, can be used together

USB charging, 220mAh battery

Micro USB input
About 2h full
Red light on the meter is charging, green light means charging is complete

Multiple uses

IP64 grade living waterproof

Note: Do not expose to rain or soak in water for a long time

Seatpost tail light installation

1. Take out the apron and tail light, and set the direction
2. Snap the apron into the tail light clip
3. After the card number, install the buckle
4. Mount the tail light on the seat tube

Helmet tail light installation

1. Tear the short Velcro off the adhesive
2. Stick on both sides of the inside of the helmet
3. The long Velcro is inserted into the clip
4. Insert both ends of the long Velcro into the helmet
5. Stick on both sides of the inside of the helmet
6. Installation is complete